Complete an average survey using just four keys.
GPS ENABLED | RECORDS DISTANCE AS YOU DRIVE
The NiteStar Distance Measuring Instrument (DMI) from MH Corbin is designed to complete an average survey using just four keys. The device records distance for logging points along a given route and will compute linear distances with a high degree of accuracy. It is easy to use and displays measurements right in your vehicle.
Measures distances on highways or guardrails, telephone pole spacing, gas pipelines, E-911 addressing, TV cable length, even the length of crop fields. Can also be used for roadway inventories, traffic studies, cable line mapping, plant engineering, railway length, accident reconstruction or traffic monitoring. Calculate volume amounts and costs for materials like asphalt, concrete and sand. Compute distances and areas using a vehicle’s speed and the distance traveled. Slimline design for easy mounting. Back-lit LCD panel has three brightness adjustments for easy viewing, kph, status, four-digit distance interval, and six-digit distance.
Easy to Use
Simple to install, collect and retrieve data
Accurate Distance Measurements
Records distance and survey coordinates as you drive
Extensive Storage
Extensive internal memory for data storage and export
Features
Thes NiteStar DMI is designed to accurately record distances and survey coordinates as you drive. The device records distance for logging points along a given route and records linear distances with a high degree of accuracy. It is easy to use and displays measurements right in your vehicle. The NiteStar has endless uses when vehicle-obtained distances are needed.
The NiteStar DMI is used in conjunction with a speed sensor mounted on the firewall or under the dashboard. This sensor transfers speed signals to the DMI for measurement and display.
- Measurements are displayed in real-time
- Displays distance intervals between point of interest
- Extensive internal memory for data storage and export
- Easy to install and use
- Optional software allows for easy organization, viewing and reporting
- Inventory data and coordinates are stored in a single file
- Customizable key definitions for user or application
- NS 50/60 General Specifications
- NS 50/60 Technical Specifications
- SS-10 Vehicle Wiring Installation Guide
- Power
- 9 to 16VDC, negative ground 90mA @12V
- Display
- LCD – 3 brightness settings 6-digit distance, 4-digit interval, 3-digit speed
- Indicators
- Up/Down arrow, AEC, Code, Mark, Count, Hold, Display Hold, Calibrate
- Speed Sensor
- SS10, OBDII, or GPS
- Keypad
- LED – 3 brightness levels, 15 key touch-tell
- Speed
- 0 to 199 (kph, mph, fps)
- Distance Conversion
- Feet, Miles, Kilometers
- Materials Calculated
- Area, volume, tonnage, cost
- Interval Counts
- Elapsed distance from last mark, Begin/ end accumulation
- Dimensions
- 7.5 x 2.22 x .88 in. (19 x 5.7 x 2.2 cm)
- GPS Receiver
- WAAS enabled (NS60)
- GPS Accuracy
- +/- 6 ft.
- Resolution
- 1 foot (1 meter)
- Calibration
- Four vehicle memory
- Pre Distance
- Capable of starting at a known distance
- Output Pulse
- 0 to 5 VDC (low going high)
- Error Correction
- Compensates for sensor error due to vehicle dynamic motion
- Output Channel
- One 0 to 5 VDC digital
- Input Channel
- One 8-bit 0 to 5 VDC analog, One 0 to 5 VDC digital
- Communications
- RS232 in/out (NS60), selectable baud rate (300-600-1200-2400-4800-9600)
- Memory
- 0 to 99 locations, NS60 – Unlimited, 20 preset plain language events
Technical Support
Toll-free: 877-257-7755
Support@mhcorbin.com
Sensor installation is covered in detail by the MH Corbin SS-10 Electronic Interface Installation Guide
DISCLAIMER: MH Corbin SS-10 electronic interface adapters are sold with the understanding that they will be installed by a professional installer who has the required expertise and supporting documentation such as Mitchell or Motor electrical service manuals or equivalent. Any documentation or information provided by M H Corbin is a general guideline for reference and is supplied without warranty or liability of any kind. Since the conditions or methods of installation, operation, use and maintenance of this equipment are beyond its’ control, M H Corbin does not assume responsibility and expressly disclaims liability for loss, damage, or expense of any kind arising out of or in any way connected with any installation, operation, or maintenance of this sensor. The user who attempts to install the electronic interface adapter assumes all responsibility for problems caused by incorrect or improper installation.
Popular Distance Measurement Instrument Downloads
Where to Buy
Distributor Map - DMI
Americas
Canada
Latin America
Ecuador
Sistemas Tecnológicos Cia. Ltda.
Diego Alcocer
593 2 6043210
dalcocer@sistemastecnologicos.com.ec
http://sistemastecnologicos.com.ec
Europe
Eastern Europe
Poland
FUSiT SYGNAŁY S.A.
ul. Sygnały 62
Rybnik
Tel. 48324218431
marketing@sygnaly.com.pl
www.sygnaly.com.pl
Southern Europe
Western Europe
Technical Support
US Toll-Free: 800-380-1718
+1 (614) 873-5216
Returns
If you are not able to successfully troubleshoot and would like to return a product to M. H. Corbin for service, please contact us for an RMA (Return Materials Authorization) Number. Only products with an RMA number and prior authorization will be accepted.
When shipping, please include the completed RMA form and clearly mark the RMA number on the outside of any shipping materials.